2020 © Store It Cold, LLC.
3
Rev 2020-8A. All Rights Reserved.
SHIPPING AND WARRANTY INFORMATION
SHIPPING
Please read carefully this section. It contains important information regarding your shipment
and instructions on receiving, inspecting, and filing claims if necessary.
•
Your CoolBot Cooler System will be delivered in ONE shipment which includes:
1.
A Cooler Enclosure (walk-in box)
2.
An A/C unit
3.
One box with installation hardware and a CoolBot Pro Temperature Controller
4.
An outdoor package if you have an outdoor cooler
•
You will be provided with shipment information (tracking) and estimated delivery times.
•
In order to protect your investment, you
r Cooler has been “crated” at the factory in an effort to
reduce possible damage during transportation.
Please be careful uncrating your cooler, use
good judgement and do not use saws, electrical saws, or anything similar that can cause
damage to the inside contents (the cooler)
. A small to medium crowbar, metal cutting hand
snips and a hammer should be used to
carefully
uncrate your cooler.
•
The walk-in cooler will be transported and delivered on a commercial LTL delivery truck.
The
receiver will be responsible for providing appropriate access to the delivery vehicle and all
necessary man power to safely unload the pallets from the carrier.
•
2-3 able bodied people are required on site for delivery.
It is at the driver’s discretion to use
the lift gate
. You should be prepared to uncrate the cooler inside the truck before unloading.
•
The receiver will be responsible for ensuring a solid surface for unloading the pallet where it can
be rolled out of the lift gate and be left on the ground if, at the discretion of the driver, the
possibility of using the lift gate to unload the pallet exists.
•
The driver is NOT expected to help uncrate the cooler. It is at his/her discretion to provide the
necessary assistance.
•
See important information in case of transit damage on next page.
