55
Overview of the LCD display
1. Battery status
2. Temperature compensation (select in the Manual tempera-
ture selection menu item)
3. Selected characteristic (select or change using the Material
key)
4. Measurement result in %
5. Status message on the measurement result (dry - critical -
moist)
6. Graphical illustration of the moisture contents (intended as
support for the status message)
Commissioning and settings
Pulling off the protective cap
The measuring needles are exposed by pulling off the protec-
tive cap. In this process, the moisture measuring device does
not switch on automatically.
Once again reposition the protective cap after having used the
device to prevent injuries caused by measuring needles and
any damage to the needles themselves.
Switching the device on and off
button. Switches the device on and off. The button is
also intended as the button to confirm your selection when
you are in a menu.
Selecting the material characteristic
Press the
button to select the corresponding material
characteristic for measurement.
3
6
2
1
4
5
