StorCase Technology Data Express DE100i-A100, Руководство пользователя

Страница: 18 / 29

DE100i-A100 User's Guide - Rev. C02 StorCase Technology, Inc.
Installation 11
Figure 10: Unit ID Select Switch Location
WARNING: Unlocking the carrier unit switches DC power off to the drive. Since
disk drives require a short amount of time to spin down, allow about
15 seconds before pulling the carrier unit out of the receiving frame
to avoid possible damage to the drive.
3. Use the alignment tool supplied with the DE100i-A100 to select the ID number of the
disk drive. Refer to Figure 10 for the location of the ID Select Switch inside the
receiving frame. Table 2 lists the valid unit ID numbers available for the drive.
4. After you have selected an appropriate unit number, replace the DE100i-A100
carrier in the receiving frame, and LOCK IT IN PLACE .
NOTE: The lock on the DE100i-A100 receiving frame functions as a lock and
a DC power switch for the carrier unit. The lock must be engaged
in order to supply power to the carrier and installed drive.
5. Reboot the computer. The new disk is now ready for use, although it may have to
be formatted or initialized prior to use with your operating system and applications
software.
Drive Carrier
Guide
Receiving
Frame
Unit ID Select
Rotating Switch
Drive Carrier
(removed)
Unit ID
Number
Display
Lock
and DC
Power
Switch
Front of Unit
0087