Setting the Configuration Address
2
Setting the Configuration Address
There are both configuration addresses and device
addresses. Jumpers W1-W3 determine the eight
configuration addresses that can be used for both 8-bit
(addresses 0-6) and 16-bit (addresses 0-6 and 8-14) devices.
Note
SCSI device address 7 is the SCSI controller address.
Use jumpers W1-W3 to set the address configurations. 2
shows the location of connector J18 and the jumpers. Table
2 lists the slot addresses assigned for each of the eight
address configurations. Figure 3 shows a basic dual bus
configuration cabling.
Figure 2 Address Configuration Jumpers
W3
W2
W1
J17
J18
J9
J14
CXO-4476A-MC
Figure 3 Configuration 5—Dual Bus
CXO-4555A-MC
J10
INPUT
CABLE
J11
J16
J17
TERMINATOR
J18
IN
OUT
W1 W2 W3
SCSI ADDRESS 0
SCSI ADDRESS 1
SCSI ADDRESS 2
SCSI ADDRESS 3
SCSI ADDRESS 8
SCSI ADDRESS 9
SCSI ADDRESS 10
INPUT
CABLE
TERMINATOR
