StorageTek L40 Series, Инструкция по эксплуатации, Страница: 26 / 30

1-6 Ninth Edition (I) 96006
5. Turn the drive tray latch knob all the way to your left. This loosens the latch to its fully
unlocked position.
1. Knob
CAUTION:
Lifting hazard: Depending upon the drive type, each drive and tray weighs between
5.0 kg (11 lb) and 5.5 kg (12 lb). Make sure you follow the lifting instructions in
“Lifting Techniques” on page xi .
6. Pull out the drive tray and set it aside.
CAUTION:
Load/unload problems: The latch must be fully loosened (disengaged) before you
slide the tray into the slot. If the latch arm contacts part of the library frame as it is
being tightened, it cannot be rotated to its fully locked position, and the tray will not
be firmly locked into the drive slot. This can cause alignment problems and the
camera can have problems reading the target.
7. Holding the replacement drive tray assembly as shown in the figure below, turn the drive
tray latch knob all the way to your right so that it is in its fully unlocked position.
8. Slide the replacement drive tray assembly into the empty slot.
1. Knob
2. Range
3. Latch arm (shown disengaged)