42
Managing the Appliance
•
The default key map is set to US English. If you want to change
the key map, run the command
sg-reconfigure --no-shutdown
.
•
The dash character is located to the left of the backspace key in
the US English keyboard layout.
Checking System Information
This section explains how you can check basic system operating status
and the software version that the access point is running. The actual
SSL VPN services are monitored through the SSL VPN Administrator in
the Monitor System pages (see the
SSL VPN Administrator’s Guide
for
details on the SSL VPN services monitoring).
To check the system status and installed software
version
1.
Log in to the SSL VPN Web Console remotely through the Access
Point or locally through the management port eth0_0 on the
appliance’s back panel at the address
https://<Web Console
IP Address>:10000
.
•
For detailed instructions for establishing the local connection,
see
Logging in to the SSL VPN Web Console
2.
Information on the software version and system status is
displayed on the right. If you navigate away from this view, you can
return by selecting
System Information
in the menu on the left.
Restarting Services
To restart services
1.
Log in to the SSL VPN Web Console remotely through the Access
Point or locally through the management port eth0_0 on the
appliance’s front panel at the address
https://<Web Console
IP Address>:10000.
•
For detailed instructions for establishing the local connection,
see
Logging in to the SSL VPN Web Console
2.
Expand
System
in the menu on the left and select
Services
.
3.
On the right, select the services that you wish to restart.
4.
Click
Restart
to restart the services that are selected above.
