Motion Activated 2200 Lumen
LED Security Light
Model: 1OV-2200M-PW/ 1OV-2200M-PB
rev030717
1
Please read all instructions thoroughly and carefully prior to installing this product.
Retain these instructions for future reference.
Failure to follow these instructions could result in voiding the product warranty.
READ FIRST:
IMPORTANT SAFETY INSTRUCTIONS
Before you begin install, service, or maintenance of this product, follow these general precautions.
•
To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions
and other hazards, please read all warnings and instructions included with and on this product prior to installation.
•
For residential installation: If you are unsure about the installation of this product, consult a qualified licensed
electrician.
•
Do not mount the unit against flammable surfaces.
•
This product is intended to be used outdoors and be subject to the elements, such as rain and snow.
•
We recommend it to be mounte
d at least 6’ 6” off the ground
.
•
This LED product must be powered directly to a switched circuit.
•
This product should not be used in areas with limited ventilation or high ambient temperatures.
•
This product CANNOT be used with a dimmer switch, motion or occupancy sensor or other electronic switching
devices.
•
This product is intended to be connected to a properly installed and grounded UL listed junction box.
WARNING: RISK OF ELECTRICAL SHOCK
•
Turn off electrical power at fuse or circuit breaker box before wiring product to the power supply.
•
Verify voltage is 110V-240V before installing.
•
Make all electrical and grounded connections in accordance with the National Electric Code and any applicable local
code requirements.
•
All wiring connections should be capped with UL listed wire connectors.
CAUTION: RISK OF PRODUCT DAMAGE
•
Never connect fixture with the power on.
•
Do not mount or support product in a manner that can cut the outer wire jacket or damage the wire insulation.
•
Avoid covering LED products with insulation, foam, or other materials that will prevent convection or conduction
cooling.
•
LED products are polarity-sensitive, ensure proper polarity before installation.
•
Electrostatic Discharge (ESD) can cause damage to LED products. Wear personal grounding equipment during
installation and service of the product.
•
Do not touch the individual electronic components, it may cause ESD (Electronic Discharge), shorten lamp life or alter
performance.
