STONEFLY USO-HA, Быстрый старт

Страница: 15 / 25

Cabling the Storage Arrays to the Storage Concentrator requires two SAS cables for each
array. Each Storage array is connected to each Storage Concentrator with one cable. The
connections to the RAID storage arrays must be configured exactly as described. The SAS
cables must be attached to the correct SAS port on the Storage Array (See Figure 6).
Each of these SAS connections is connected to one of the SAS ports on the back of each
Storage Concentrator. The First RAID Storage Array should be connected to the first SAS
port on the rear of the Storage Concentrator, and the Second RAID Array (if applicable)
should be connected to the second SAS port on the rear of each Storage Concentrator
(See Figure 7 and 8).
Connecting the Storage Concentrators to the RAID Storage Array:
USO-HA
Quick Start Guide
12
Figure 6: StoneFly
USO-HA™ Cluster