V8.0.3x
©StoneFly, Inc. 2020 | All rights reserved
Page 30
StoneFly DR365V-1204 Getting Started Guide
Initial Installation
The screenshot above shows one SCVM is already installed. If you want to access the user
interface for that particular SCVM, click on that SCVM first and then click on the
Console
Tab.
You will see a screen like the one shown below:
Steps to use the pre-installed SCVM:
1. The SCVM management network interface is preconfigured with the default IP address of
192.168.0.254. This must be changed to a valid address for your LAN network. Login to the
SC
Service
console using the VMware
Virtual Console
for the SCVM by doing the following:
a.
Press
Enter
to display the login prompt.
b.
At the User ID prompt type
console
and hit
Enter
.
c.
At the password prompt type
coni100o
and hit
Enter
. Note that the User ID and
password are case sensitive.
