background image

35

866-795-1586 • WWW.STONEAGETOOLS.COM

TERMS AND CONDITIONS AND WARRANTY INFORMATION

6. DISCLAIMER OF IMPLIED WARRANTIES AND OTHER 
REMEDIES.   EXCEPT AS EXPRESSLY STATED HEREIN 
(AND TO THE FULLEST EXTENT ALLOWED UNDER 

APPLICABLE LAW), STONEAGE HEREBY DISCLAIMS 
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 

INCLUDING WITHOUT LIMITATION ALL IMPLIED 
WARRANTIES OF MERCHANTABILITY OR FITNESS 
FOR A PARTICULAR PURPOSE, AND ANY AND ALL 
WARRANTIES, REPRESENTATIONS OR PROMISES 

AS TO THE QUALITY, PERFORMANCE OR FREEDOM 

FROM DEFECT OF THE PRODUCT COVERED BY 

THIS LIMITED WARRANTY.  STONEAGE FURTHER 

DISCLAIMS ALL IMPLIED INDEMNITIES.

7. 

LIMITATION OF LIABILITY.

  End-User specifically 

acknowledges that the Product may be operated at 

high speeds and/or pressures, and that as such it may 
be inherently dangerous if not used correctly.  End-
User shall familiarize itself with all operation materials 
provided by StoneAge and shall at all times use and 
require its agents, employees and contractors to use 

all necessary and appropriate safety devices, guards 
and proper safe operating procedures.  In no event shall 

StoneAge be responsible for any injuries to persons or 
property caused directly or indirectly by the operation 

of the Product if End-User or any agent, employee, or 
contractor of End-User:  (1) fails to use all necessary 
and appropriate safety devices, guards and proper 
safe operating procedures; (2) fails to maintain in good 
working order such safety devices and guards; (3) alters 
or modifies the Product in any way not approved by 

StoneAge in advance in writing; (4)  allows the Product to 
be operated under more severe conditions or beyond the 
rated capacity specified for the Product; or (5) otherwise 
negligently operates the Product.    End-User shall 
indemnify and hold StoneAge harmless from any and all 
liability or obligation incurred by or against StoneAge, 
including costs and attorneys’ fees, to or by any person 
so injured.

TO THE FULL EXTENT ALLOWED BY APPLICABLE 

LAW, STONEAGE SHALL NOT BE LIABLE FOR ANY 
INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL, 
OR PUNITIVE DAMAGES (INCLUDING WITHOUT 
LIMITATION, LOSS OF PROFITS, LOSS OF GOODWILL, 
DIMINUTION OF VALUE, WORK STOPPAGE, 
INTERRUPTION OF BUSINESS, RENTAL OF 
SUBSTITUTE PRODUCT, OR OTHER COMMERCIAL 
LOSS EVEN TO THE EXTENT SUCH DAMAGES WOULD 
CONSTITUTE DIRECT DAMAGES), WITH RESPECT TO 

THE COVERED STONEAGE PRODUCT, OR OTHERWISE 

IN CONNECTION WITH THIS LIMITED WARRANTY, 
REGARDLESS OF WHETHER STONEAGE HAS BEEN 

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. 

IT IS UNDERSTOOD THAT STONEAGE’S LIABILITY, 
WHETHER IN CONTRACT, IN TORT, UNDER ANY 
WARRANTY, IN NEGLIGENCE, OR OTHERWISE SHALL 
NOT EXCEED THE AMOUNT OF THE PURCHASE 
PRICE PAID BY THE END-USER FOR THE PRODUCT.  
STONEAGE’S MAXIMUM LIABILITY SHALL NOT 
EXCEED, AND END-USER’S REMEDY IS LIMITED 

TO EITHER (1) REPAIR OR REPLACEMENT OF THE 

DEFECTIVE WORKMANSHIP OR MATERIAL OR, AT 
STONEAGE’S OPTION, (2) REFUND OF THE PURCHASE 
PRICE, OR (3) ISSUANCE OF A CREDIT FOR THE 
PURCHASE PRICE, AND SUCH REMEDIES SHALL BE 
END-USER’S ENTIRE AND EXCLUSIVE REMEDY. 

YOU, THE END-USER, UNDERSTAND AND EXPRESSLY 

AGREE THAT THE FOREGOING LIMITATIONS ON 

LIABILITY ARE PART OF THE CONSIDERATION IN 

THE PRICE OF THE STONEAGE PRODUCT YOU 

PURCHASED. 

Some jurisdictions do not allow the limitation or 

exclusion of liability for certain damages, so the above 

limitations and exclusions may not apply to you.  This 
Limited Warranty gives you specific legal rights, and you 
may also have other rights which vary from jurisdiction 
to jurisdiction.  If any provisions of this Limited Warranty 
is held to be invalid or unenforceable, such invalidity 

or unenforceability shall not affect the validity or 
enforceability of the other portions hereof.

Содержание TORUS TR-130





































Отзывы: