StoneAge FC-SG Скачать руководство пользователя страница 9

© 09/05 

6.0  LIMITED WARRANTY

 

 
StoneAge, Inc. warrants to the extent herein provided the products of its own manufacture against defects 
in material and workmanship under normal use and service for which the products were designed for a 
period of six months after shipment from the factory.  If such products should fail through defect in 
workmanship or material and specific written notice of failure is made within six months after date of 
shipment from factory, StoneAge, Inc. will either repair or replace any such items, F.O.B. its factory without 
charge.  StoneAge, Inc. shall not be liable for expense incurred in repairs or alterations made outside the 
factory without the proper and prior authorization.  StoneAge, Inc. shall have the option of requiring the 
return of the defective products to its factory, with transportation charges prepaid, to establish the claim.  
StoneAge, Inc. shall in no event be held liable for damages or delay resulting from or arising out of 
defective products nor for consequential damages or otherwise except for repair or replacement of items 
of defective material or workmanship aforesaid. 
 
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED 
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE AND NEITHER 
ASSUMES, NOR AUTHORIZES ANY PERSON TO ASSUME FOR STONEAGE, INC. ANY OTHER 
LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS.  THIS WARRANTY SHALL NOT 
APPLY TO PRODUCTS OR ANY PARTS THEREOF WHICH HAVE BEEN SUBJECT TO ACCIDENT, 
NEGLIGENCE, ALTERATION, ABUSE, OR MISUSE.  STONEAGE, INC. MAKES NO WARRANTY 
WHATSOEVER IN RESPECT TO ACCESSORIES, PARTS OR PRODUCTS NOT MANUFACTURED BY 
STONEAGE, INC. 

 
 

Содержание FC-SG










Отзывы: