Stone Lift Jockey LJ100, Руководство по обслуживанию и запасным частям

Страница: 20 / 72

- 20 -
MAINTENANCE
FLUIDS AND LUBRICATION
Hydraulic Oil-- Check the hydraulic fluid level.
Use the sight gage located on the hydraulic tank.
A 1/4-1/2" air bubble will be seen at the top of the
gauge showing the fluid level.
For satisfactory operation, the following fluid
conditions apply:
• Accurate level readings can be checked only
when the fluid is cold.
• If the natural color of the fluid has become
black or milky, it is possible that an overheating
or water contaminant problem exists.
• Do not mix hydraulic fluids. Mobil 424 SUS
255/55CST ISO VG55 is recommended for the
hydraulic system.
CAUTION: After a new unit has run 5 hours, the
oil filter should be changed. This is to rid the
system of any trapped contamination from the wear-
in of the parts, see Maintenance.
Engine Oil-- SAE 30 API SH or SJ (oil with
“starburst” certification mark) is recommended for
general, all temperature use. Check daily for proper
oil level. DO NOT OVERFILL. See Engine
Owner’s Manual for specifications.
ENGINE IS EQUIPPED WITH LOW
OIL SHUTDOWN. UNIT WILL SHUT
DOWN IF ENGINE OIL IS LOW
Gasoline Fuel-- Always use fresh, unleaded gaso-
line (86 octane min.). Fresh gasoline is blended for
the season and reduces gum deposits that could clog
the fuel system. Do not use gasoline left over from
the previous season.
Refer to the Engine Manual for break- in.
DO NOT MIX OIL WITH FUEL. The engine has
a separate oil reservoir in the crankcase. Unleaded
gasoline is recommended for use in the engine since
it leaves less combustion chamber deposits.
FUEL IS BOTH TOXIC AND FLAM-
MABLE
DO NOT SMOKE WHILE WORKING
WITH FUEL
DO NOT USE NEAR OPEN FLAME
ALWAYS STOP ENGINE BEFORE RE-
FUELING
WARNING
WARNING
Filter
Gauge
Level Sight
Glass
Breather
Hydraulic
Fill Cap
Hydraulic
Tank
Fluids/Lubrication