- 18 -
MAINTENANCE
95CMP & 95CMPED
NOTE:
Cowl removed for clarity. Do not operate
mixer with cowl removed.
A.
ENGINE
- Daily check the oil levels in
the engine and engine reduction unit. The
engine warranty is
VOID
if run without
oil. Since there are many options avail-
able on this mixer, consult the ENGINE
MANUAL for specific recommendations
as to oil level, oil type required and
frequency of oil changes required. For
maximum service life from the engine,
follow those recommendations.
B.
* WEEKLY
- Grease idler shaft pillow
block bearings on electric drive models.
*WEEKLY -
Check diesel gearbox oil
level. Oil level should be visible at pipe
plug. Lubricate diesel gearbox with
SAE30W to SAE80W oil as needed.
C.
WEEKLY
- Lubricate chain and sprock-
ets on chain drive models with a few drips
of SAE 30 motor oil or any spray chain
lube.
D. MONTHLY
- Grease trunnions (2)
places and drum spindle (2) places.
E.
YEARLY -
Repack (4) tapered roller
bearings in wheel hubs and replace
wheel seals. Install washer and nut.
Torque to 20 ft. lbs. back off one turn,
torque to 7 ft. lbs. back off to first slot in
nut and insert cotter key.
F.
DO NOT
lubricate pinion and ring gear.
They will collect abrasive materials and
accelerate wear.
Lubricate diesel gearbox with SAE30W oil as
needed.
Use any Grade #1 lithium base grease for the
above applications.
*
See Exploded Views with Parts Section of this
manual for exact location.
* Gearbox gasket kit P/N 23197.
Содержание 95CMP
Страница 2: ......
