Stone 1050PM, Руководство по обслуживанию и запасным частям

Страница: 15 / 69

- 17 -
Maintenance
B
EFORE
W
ORKING ON
M
ACHINE
,
M
AKE
S
URE
E
NGINE
S
PARK
P
LUG
W
IRE IS
D
ISCONNECTED
,
OR
,
IF
E
LEC
-
TRIC
,
THAT THE
E
LECTRIC
C
ORD IS
D
ISCONNECTED
,
TO
P
REVENT ANY
A
C
-
CIDENTAL
S
TARTING
.
Hardware --Check all hardware on mixer and
engine/motor before starting. Consult the T
ORQUE
C
HART
section of this manual and tighten any loose
hardware accordingly.
Fuel-- If your mixer is equipped with a gasoline
engine, fill the gas tank with clean gasoline from a
safety can. Consult the
ENGINE MANUAL
supplied
with this unit for the proper type of gasoline re-
quired.
DO NOT mix oil with gasoline.
Before operating this unit, it is important to
familiarize yourself, and any other personnel who
will be using it, with the location and proper use of
the controls to insure safe and efficient operation.
A. Always make
sure that the drum
latch is in the lock
position (down)
before starting
machine. With
engine running,
turn clutch lever
to the right to turn
paddles or to the
left to stop.
B. To dump mix
from drum, stop
paddles, move
drum latch up and
pull dump handle
down. Always
use caution when
dumping mix.
C. Always grease drum seals (both ends as
recommended in the maintenance chart. The grease
purges dirt--prolonging bearing life.
D. Always keep
drum and paddles
clean. Never run
machine with
hardened mix or
foreign objects in
drum--doing so
damages paddles
and/or engine.
Hardware/Fuel/Location
and Use of Controls