1
Installation and Operation Instructions
Stone Age Patio Series Outdoor Fireplace
SA-24PS
1.0 Introduction
The following provides instructions for the installation
and operation of the Stone Age Fireplace, manufac-
tured by Stone Age Manufacturing, Collinsville, Okla-
homa.
Three generations of fireplace knowledge and experi-
ence have gone into the design and construction of the
Patio series fireplaces. Patio Series fireplaces are de-
signed for outdoor use only, and should not be in-
stalled near a structure or covered area. A minimum of
8’ horizontal clearance to a structure or covered area is
recommended.
Assembly and Cutaway views of a SA-24PS fireplace
are shown in Figure 1.
It is recommended that this fireplace be installed by a
professional installer, or by a builder in new construc-
tion. Installation by a non-qualified person may ne-
gate the warranty.
Keep these instructions for future reference.
2.0 Description
The fireplace is delivered as a kit with all components
necessary to complete the installation. Component
arrangements are shown in Figure 2. Components are
listed in Table 1. Specifications and clearances are
shown in Table 2.
A completed installation should include the following:
A. Fireplace items shown in Figure 2 and listed in
Table 1.
B. Chimney Cap (sold separately) (Shown in Figure
15).
C. Fireplace Grate (sold separately) (Shown in Fig-
ure 16).
D. Split firebrick (firebrick is optional, and not re-
quired on Patio Series fireplaces, but may be in-
stalled if desired, sold separately).
E. Stone Age Multi-Purpose Ready-Mix Cement
(sold separately).
F. Masonry-compatible finishing materials, as re-
quired to cover the outer surfaces of the fireplace kit
(sold separately).
Ensure that appropriate building permits required by
local codes are obtained before installation in an exist-
ing home.
SA-24PS
Front View
3
3
3
3
9A
8
8
9A
Side
Cutaway
View
Figure 1. SA-24PS Fireplace Assembly
& Cutaway View
3
3
3
4
2
Figure 2. SA-24PS Exploded View
Содержание SA-24PS
Страница 11: ...11...
