Stone Age NA36IND Скачать руководство пользователя страница 1

 

1

 

Report 307-F-02b-2 

 

Installation and Operation  

Instructions 

Stone Age Indoor Fireplace 

 

 

 

1.0 Introduction  

The following provides instructions for the installation 
and  operation  of  the  Stone  Age  Fireplace,  manufac-
tured by Stone Age Manufacturing, Collinsville, Okla-
homa. 

Three generations of fireplace knowledge and experi-
ence have gone into the design and construction of the 
New Age series fireplaces.    New Age Fireplaces are 
certified to UL127 for the US, and ULCS610 for Can-
ada.   They are also certified in accordance with ICC-
ES AC156 meeting structural design requirements for 
Earthquake  Testing  at  a  compliance  level  of  Sds  = 
2.5g.  The ICC-ES AC156 complies with 2010 Ameri-
can  Society  of  Civil  Engineers  (ASCE)  7-10,  2009 
International  Building  Code  (IBC),  2010  California 
Building Code and 2012 ICC-ES AC156.   Assembly 
and  Cutaway  views  of  a  NA36IND  fireplace  are 
shown in Figure 1.   

 

 

Because of structural modifications required in an ex-
isting  home,  it  is  recommended  that  this  fireplace  be 
installed by a professional installer, or by a builder in 
new  construction.  Installation by a non-qualified per-
son may negate the warranty. 

Keep these instructions for future use.  

2.0 Description 

The fireplace is delivered as a kit with all components 
necessary to complete the installation.  The kit is con-
figured  for  a  flue  chimney,  but  a  special  adapter  is 
available  for  a  metal  chimney.    Component  arrange-
ment, some of which is optional, is shown in Figure 2.  
Components are shown in Table 1.  Specifications and 
installation dimensions are shown in Table 2. 

A completed installation should include the following: 

A.  Fireplace  items  shown  in  Figure  2  and  listed  in 
Table 1. 

B.  Damper (sold separately) (Shown in Figure 11). 

C.  Chimney Cap (sold separately) (Shown in Figure 
22). 

D.  Fireplace Grate (sold separately) (Shown in Fig-
ure 26). 

E.  Full firebrick (sold separately) 

F.  Stone  Age  Multi-Purpose  Ready-Mix  Cement 
(sold separately).   

The Stone Age Fireplace has been tested and listed in 
accordance with UL 127 and ULC S610 standards for 
indoor or outdoor use, and is listed by OMNI-Test La-
boratories,  Inc.  for  installation  and  operation  in  the 
United States and Canada as described in this manual. 

This fireplace is designed to supplement your current 
heating system.  It is not designed to be used as a pri-
mary heat source.  

Ensure  that  appropriate  building  permits  required  by 
local codes are obtained before installation in an exist-
ing home.

 

 

 

 

Ce manuel est disponible en français à 

www.stoneagemanufacturing.com

This manual is available in French at 

www.stoneagemanufacturing.com

.  

NA36IND 

Front View 

Side  

Cutaway 

View

Figure 1. NA36IND Fireplace Assembly 

     & Cutaway View 

Содержание NA36IND















Отзывы: