STOLZENBERG KSE 910, Руководство по эксплуатации

Страница: 13 / 18

KSE 910 Date 0507 13
Battery charging
To charge the battery, you must:
•
switch off the sweeper,
See page.. Switching off the sweeper
•
open the hood and fasten it,
•
pull out the charging plug and connect to the plug of the charger,
•
switch on the charger.
The charging process takes about 10 hours.
The automatic charger has a charge retention and can remain
connected to the battery even for a longer time without any problems.
This ensures that you always have a fully charged battery available
when you start work.
Exclusively use this charge cable or you may experience trouble with
the charging process or you may break the battery charger or the
battery.
You must not use the sweeper if it is connected with the battery
charger.
Maintenance chart
Maintenance daily
- Check the machine as to visual damages and correct operation.
- Empty the dust container.
- Check the brushes - roller tunnel for any parts that are sticking to them or for jammed debris,
which narrow the brush tunnel and restrict the free movement of the roller brushes.
- Charge the battery.
- Check the state of the dust filter, clean it if required.
In addition, after every 50 running hours
- Check if sweeping rollers are worn or obstructed by foreign objects and replace, if necessary.
- Check sweeping contour and readjust, if necessary.
- Check if side brush adjustment is worn and readjust or replace, if necessary.
In addition, after every 100 running hours
- check all belts for cracks or impermissible elongation, replace if required.
- Check all bearings for wear.
- Check all seals as to damage and tightness.
- Check cable joints for firmness, replace faulty cables.
- Check the dust filter and replace if necessary.
- Check dust suction for foreign objects, and clean.