STOLZENBERG KSE 910, Руководство по эксплуатации

Страница: 11 / 18

KSE 910 Date 0507 11
Filter cleaning
Make sure the dust collector has been installed.
•
Move the filter cleaning lever –1-back and forth a few times.
The filter gets cleaned as a result.
The dust that is stripped off falls in the dustbin.
Note
It is recommended to wait for a few seconds till the dustbin
is emptied, till the fine dust has settled.
Changing the filter
Dismantling the filter
•
Remove the dustbin (see the page...dustbin emptying).
•
Press the filter holders –1-inwards in such a way that they point to
one another.
•
Take out the filter downwards.
Filter mounting
•
Place the filter in the filter frame and press the filter frame
upwards with the hand.
•
Hold the filter frame in this position.
•
Rotate the filter holder outwards with the other hand.
Mounting the side brushes
•
Hold the side brushes below the side brush arm and rotate the
side brushes in such a way that the side brush clips are located
below the relevant recesses.
•
Press the side brush upwards till it tangibly clicks into place.
Removing the side brushes
•
Press the clips –1- below the side sweeper brushes inwards and
at the same time, pull down the side sweeper brushes
downwards.