25
Configuring before HDR10 Signal Input
SA-6000E and SA-6000D Support HDR10 only if the HDMI Timing Hybrid is
set to “Pass-through” mode (default setting). Before you input HDR10 video,
ensure the source and all displays support HDR10, and follow the steps
below to configure the decoder through PF-PC Console.
1. Double click Apollo Configurator.exe. Click
Search
to search online
devices.
2. Click
Batch Commands
to open Batch Commands window:
Click
Video
Tab > Choose SA-6000D in the Devices list > Click
Pass-Through
from the drop down list in
HDMI Timing Hybrid
region >
click
Apply
.
Note:
The default setting for HDMI Timing Hybrid is
Pass-Through
.
3. Reboot the devices configured for the new settings to take effect.
Now you can play HDR10 video on your devices.
