9
No.
Name
Description
the "DEBUG" position, connect this port to a RS232
device such as a computer for debugging
SA-6000E.
7
USB Host
Connect a type A male to type B male USB cable
between this port and the USB port of a desktop or
laptop. SA-6000E is USB 2.0 compliant.
8
HDMI IN
Connect this port to an HDMI source device.
9
HDMI OUT
Connect this port to a local HDMI display device.
10
IR IN
Connect this port to an IR receiver for IR communication
with an IR emitter at the SA-6000D side on the network.
11
IR OUT
Connect this port to an IR emitter for IR communication
with an IR receiver at the SA-6000D side on the
network.
Decoder
Front Panel
5
4
3
2
1
No.
Name
Description
1
Power LED
On:
SA-6000D is powered on.
Off:
SA-6000D is powered off.
2
Status LED
On: SA-6000D is connected to SA-6000E and the
video is displayed.
Blinking: SA-6000D is disconnected from
SA-6000E.
Off: SA-6000D is powered off or in the boot process.
/ Network is down.
3
Mode
Use this switch to toggle between normal and debug
modes
.
Normal (Default): In this mode, you can connect the
rear panel RS232 port to a RS232 device such as a
computer for bi-directional serial communication
with a RS232 device on the IP control box side.
Debug: In this mode, you can connect the rear
panel RS232 port to a RS232 device such as a
computer for debugging SA-6000D.
