Stollmann
E + V GmbH
C11/G2
Hardware reference
Author: jj
Date of Saving: 23.02.07
Ref: C11-G2_HWreference_V1_0.doc
Revision: 0.1
Page 31 of 31
7 Safety Guidelines
According to SAR regulation EN 50371-2002 the C11/G2 is not intended to be
used in close proximity to the human body. Please refer to above-mentioned regulation for
more specific information.
In respect to the safety regulation EN 60950-1: 2001 all conductive parts of the
C11 are to be classified as SELV circuitry. OEM’s implementing the
C11/G2 in their products should follow the isolation rules given in regulation
EN 60950-1: 2001.
The PCB material of the C11/G2 is classified UL-94V0.
8 Regulatory Information
8.1 Declaration of conformity
Declaration of Conformity in accordance with Radio and Telecommunications Terminal
Equipment Act (FTEG) and Directive 1999/5/EC (R&TTE Directive
Stollmann E+V GmbH, Mendelssohnstr. 15d, D-22761 Hamburg, Jens Jensen
The manufacturer / responsible person
declares that the product family
C11/G2
Telecommunications terminal equipment with intended purpose:
Serial Bluetooth Module
complies with the essential requirements of §3 and the other relevant provisions of the FTEG ( Article 3 of the R&TTE
Directive), when used for its intended purpose.
Health and safety requirements pursuant to §3(1)1.(Article 3(1)a))
:
Average Output Power is lower than 20mW, not intended to be used close to the human body.
Harmonised standards applied
EN 60 950-1: 2001, EN 50371-2002
Protection requirements concerning electromagnetic compatibility §3(1)(2), (Article 3(1)b))
harmonised standards applied
EN 301 489-1 V1.5.1
(tested mounted on Blue+EVA built in plastic housing)
EN 301 489-17 V1.2.1
(tested mounted on Blue+EVA built in plastic housing)
EN 300 328-2 V1.6.1 (2004)
(tested mounted on Blue+EVA built in plastic housing)
Electromagnetic compatibility and Radio Spectrum Matters (ERM)
Original signed available on request
