ASSEMBLING
your Stollar Juice Presso™ BJP500
BEFORE FIRST USE
Before using the Juice Presso™ for the first time,
remove and safely discard any packaging material
and promotional labels.
Ensure the power cord is unplugged from the wall
outlet.
Wipe the motor base with a damp cloth. Dry
thoroughly.
Wash the juice container, pulp container, hopper,
drum, food pusher and pulp container in warm
soapy water with a soft cloth or nylon brush. Rinse
and dry thoroughly.
Assemble the squeezing screw and the strainer.
4.
these parts are not dishwasher safe.
NOTE
Place the motor base on a flat dry surface such
as a counter-top. Ensure the power cord is
unplugged from the wall outlet.
1.
Underneath the juicing drum is the silicon pulp
extraction pad, which is used to remove the pulp
from the spout of the juicing drum. Ensure that
the silicon pad is firmly inserted into the juicing
spout.
Place the juicing drum on top of the motor base.
Make sure the drum is all the way down into the
shafts of the motor base.
2.
3.
Align the “Open Lock” symbol on the screw
with the arrow on the strainer.
Turn clockwise until the arrow is aligned with
“Closed Lock” symbol to secure both parts
firmly.
Place the assembled squeezing screw into the
centre of the drum. Ensure that the screw is in
position by pressing down on it.
a)
b)
5.
ASSEMBLING YOUR STOLLAR JUICE PRESSO™ BJP500
