Stokke XPLORY Summer Kit, Руководство пользователя

Страница: 5 / 36

STOKKE
®
XPLORY
®
1
From basic to summer kit:
Remove the hood (1)
- Unzip to release the hood.
- Unbutton on each side of the hood.
- Pull up the fabric on the side at the
front to reveal the hood fastener.
- Press the notch on the hood fastener
and pull up the hood. Repeat at the
other side.
Remove the back cover (2)
- Loosen the fabric from the push
buttons in the sides and front.
- Pull the fabric off the Velcro.
Assembly the summer kit:
Seat (3)
- Put on the back cover:
* Line up the center mark on the
fabric to the corresponding center
mark on the seat guard
* Attach the cover edge-to-edge on
the Velcro.
* Attach the cover with the push
buttons, 2 on each side, and with
the two on each side of the front.
- Insert the main rib into both sides
of the hood fastener. A click will be
heard when the rib is placed correctly.
Fasten the hood with the push but-
tons on each side. Zip the hood onto
the seat fabric.
Carry cot (4)
- Insert the main rib into both sides of
the hood fastener.
- A click will be heard when the rib is
placed correctly.
- Attach the hood to the Carry Cot
lining with the zipper.
- Fasten the hood with the push
buttons on each side.
For Aeration (5)
- Pull up the fabric on the back of the
hood. Fasten with the push buttons.
Summer sail:
Seat (6)
- Place the summer sail over the main rib
of the hood. Fasten it with the push
buttons. One on each side.
- Drag it to the desired position.
- The ends of the summer sail are
fastened with the push buttons around
the handle and with hooks on the foot
rest.
- Tighten at each side.
Carry cot (7)
- Place the summer sail over the main rib
of the hood. Fasten it with the push
buttons. One on each side.
- Drag it to the desired position.
EN