Stoelting CBD117, Руководство оператора

Страница: 17 / 23

Operators Manual #513852 Rev.2 11 CBD Model Machines
B. Prepare sanitizing solution according to
manufacturer’s instructions to provide a 100 ppm
strength solution. Mix the sanitizer in quantities
of no less than 2 gallons of 90° to 110°F (32° to
43°C) water. Check the strength of the sanitizing
solution. Use a chlorine test strip and color chart
to make sure the solution has 100 ppm.
C. Place all parts in the cleaning solution and clean
the parts with brushes and sponges. Rinse all
parts with clean 90° to 110°F (32° to 43°C) water.
Place the parts in the sanitizing solution.
D. Remove the parts from the sanitizing solution and
allow them to air dry.
E. Wash the steel tank bottom on the machine with
the 90° to 110°F (32° to 43°C) cleaning solution.
3.9 ROUTINE CLEANING
To remove spilled or dried mix from the machine exterior,
wash in the direction of the fi nish with warm soapy water
and wipe dry. Do not use highly abrasive materials as
they mar the fi nish.
3.10 PREVENTIVE MAINTENANCE
A. DAILY
1. Clean the drip tray.
2. The exterior should be kept clean at all times to
preserve the luster of the stainless steel. A mild
alkaline cleaner is recommended. Use a soft cloth
or sponge to apply the cleaner.
B. MONTHLY
Air Cooled Condenser Cleaning
A. Disconnect power to the machine.
B. The fi lter is attached to the right side by tabs in
the side panel. Press the tabs downwards and
remove the fi lter.
C. Visually inspect the fi lter for dirt. If it is dirty,
shake or brush the excess dirt off the fi lter and
wash in a warm, soapy water. Once it is clean,
rinse thoroughly, shake dry and install it onto the
machine.
NOTE
If the condenser fi lter is not kept clean, refrigeration
effi ciency is lost.