Stocks AG Turbo Jet 10, Руководство по эксплуатации

Страница: 42 / 50

8
GRASS SEED ROLLS
Use for grass seed and grass seed mixes.
The standard roll is an 8 section roll - use all 8
with the appropriate spacers. Do not fit any
stainless steel discs with these.
Remember to use the agitator when calibrating
and seeding grass.
SMALL SEED ROLLS
Use for OSR, stubble turnips, mustard, etc.
The standard roll is 5mm wide, 18 tooth
polyurethane, with a stainless steel drive disc
embedded inside.
YELLOW rolls are used for low rate OSR, usually 1
per outlet – if higher rates are required use WHITE
rolls that apply approx. 25%-30% more per rev. If
you cannot achieve the required rate using just a
single YELLOW or WHITE roll, then use multiple rolls
together per outlet – 2 or 3 – you can mix YELLOW
and WHITE provided each outlet has the same
configuration of feed rolls.
Enough of these are supplied as standard to use up to 3 per outlet, and depending on the
combination of required seeding rate implement width and forward speed, you will use 1, 2 or 3 rolls
per outlet in combination with, or without, the black roll spacers, to achieve the application rate.
Black Roll Spacers -
The black roll spacers are the same width as the small seed rolls and are used in
combination with the feed rolls to allow 1, 2 or 3 feed rolls per
outlet to be used – or to replace the feed rolls and blank off an
outlet completely.