Stocks AG Fan Jet Pro Plus 130, Оригинальное руководство по эксплуатации и список запасных частей

Страница: 8 / 24

8
7 .1 Emergency Stop instructions
In the case of an emergency always switch of the main power switch on the control panel and isolate
the power supply immediately by disconnecting the power cable
7.2 Maintenance
WARNING
Always ensure the power supply is disconnected before any maintenance work or cleaning of this
machine.
Suitable protective clothing must be worn (See page 6)
DO NOT JET WASH THIS MACHINE
The machine must be checked regularly by the operator for any damage loose bolts or electrical connections,
vibrations, unusual sounds, and to ensure they function correctly.
Before use;
1 . Ensure the machine is securely mounted
2 . Check the power supply
3. Check the feed block assembly’s to ensure the feed rollers are clean and replace any worn feed rollers
4. Check the feed rollers rotate freely before starting work
Daily checks;
1. Check the disc to motor shaft socket screws on the lower side of the spinning disc to ensure they are tight
and the spinning disc turns with the motor
2 . Check the stainless disc for any wear or distortion and replace prior to use if necessary.
Replacement vane kits available; Part number FJ009A
3. Check the feed block assembly’s to ensure the feed rollers rotate freely
After each use;
1. Empty hopper before removing the feed block assembly and clean the machine thoroughly ensuring all
pellets residue has been cleaned from the hopper feed rollers and body of the machine.
2 . Store in dry conditions to protect the machine and control system from moisture
WARNING
Always observe all guidelines provided by the product
manufacturer with regards to
handling storage and disposal of products as some may be toxic !
Main Power
On-Off switch