Operating instructions
EN-28
| www.stobag.com
All rights to make modifications are reserved
All rights to make modifications are reserved
www.stobag.com |
Dangers of working at height
Not taking appropriate care when on ladders or platforms can lead to falls and result in
serious injuries.
• Before any cleaning work on ladders and/or platforms, make sure that the floor below
is suitable, even, solid, and stable.
• Make sure that ladders and platforms are completely intact and are at the correct
height for the cleaning work to be performed.
• Do not lean over far from a raised position (ladders), turn around on the ladder, or step/
climb onto facade features or window ledges.
• Always wear anti-slip footwear.
Modifications may be made to a sun protection system or the configuration of an auto-
matic system with electric power only with the agreement of STOBAG or the specialist
supplier. Modifications to a sun protection system can create a dangerous situation and
considerable risk of damage to people or objects.
Any dismantling or re-installation may only be made by technically qualified and trained
personnel. It must be ensured that the correct brackets and fixing materials must be used
for the surface on which the system is to be installed. The height the system is installed at
must exclude the possibility of harming people as it is extended.
Important for electrically-powered sun protection systems! Risk of electric shock! Work
on electrical components may only be carried out by qualified electricians. Examine power
cables regularly for wear or other damage. The drive must never be used if the power
supply cable is damaged.
If there is a problem with the sun protection system, please contact your STOBAG
specialist supplier.
1.3 Max. permissible wind load for built-in shading
The sun protection system has been built to comply with wind resistance class 3 (see
table 1.4) in the CE conformity classification. The awning complies with class 2 with
a load of > 500 cm. What wind resistance class after assembling has been achieved
depends largely on the type and quantity of the used fixing materials used and the surface
it is installed upon. The sun protection system may only be used up to the declared wind
resistance class declared by the installer.