1
2
3
Pan
Tilt
Lamp tube
Reflector
Module and Accessories
The fitting uses a Xicato LED module. The colour
temperature and lumen output can be found on the
product label of the fitting.
To change the reflector:
Isolate the fitting from the supply and allow to cool.
Step 1 Remove the lamp tube by unscrewing in an
anti-clockwise direction.
Step 2 Remove/Insert the reflector.
Step 3 Refit the lamp tube by screwing on in a clockwise
direction. Check that the reflector is aligned
centrally over the LED.
Adjustment
To adjust the tilt and pan of the fitting use an Allen key to
loosen off the tilt and pan lock screws.
Use a 3mm Allen key
Once the desired angle is achieved lock off the screws.
DO NOT
over tighten the screws as this could damage
the lock and cause it to no longer function.
4
410 381 1497 inter-lux.com [email protected]
Inter-lux reserves the right to make technical changes without notice.
STOANE
LIGHTING
