Stoane Lighting 50mm ADL CP.X Скачать руководство пользователя страница 3

Страница: 3 / 4

To Fit the Cover Plate

Centrally locate the cover plate onto the bezel

aligning the slot with the flats on the ADL bezel.

Rotate

90° clockwise

to secure.

To Remove the Cover Plate

Rotate

90°

Use a screwdriver or similar in the slot to prise off

the plate (Use caution, do not damage the paint)

Slot

90°

Pan & Tilt locking

Tightening the installation

screws will swing out the tabs

which clamp ceiling surface

from behind, retaining the

fitting.

To LED driver

Ø92mm cut out

50mm ADL CP X.pdf 3 11/12/2019 12:49:26

Содержание 50mm ADL CP.X

Страница 3: ...cure To Remove the Cover Plate Rotate 90 Use a screwdriver or similar in the slot to prise off the plate Use caution do not damage the paint Slot 90 Pan Tilt locking Tightening the installation screws will swing out the tabs which clamp ceiling surface from behind retaining the fitting To LED driver Ø92mm cut out 50mm ADL CP X pdf 3 11 12 2019 12 49 26 ...

Страница 4: ...d lumen output can be found on the product label on the fitting To Add Remove accessories Isolate the fitting from the supply and allow to cool Step 1 Remove the circlip and any accessories Step 2 Remove the optic Step 3 Replace optic and accessories as required and secure with circlip 50mm ADL CP X pdf 4 11 12 2019 12 49 26 ...