Debug through hardware exploration
AN4989
88/118
AN4989 Rev 3
This is typically pin PA8 for all STM32 families.
For Nucleo kits, the PA8 pin is accessible on the D7 pin of the ARDUINO
®
connector.
For other board pin configuration, please refer to the board schematics.
Depending on board or and chip families, other pins can be used if needed and available.
The
Ctrl + click
on RCC_MCO pin command sequence under STM32CubeMX highlights in
blue the alternate pin. An example is shown in
.
Figure 67. MCO alternate pin highlight exemple with L073
STM32CubeMX Clock Configuration pane selects the signal to route to pin and the divider
as presented in
Содержание STM32 Series
Страница 46: ...Connecting to the board AN4989 46 118 AN4989 Rev 3 Figure 30 Keil hotplug step2 ...
Страница 91: ...AN4989 Rev 3 91 118 AN4989 Debug through hardware exploration 117 Figure 69 STM32F4 F7 dual MCO capabilities ...
Страница 103: ...AN4989 Rev 3 103 118 AN4989 Managing DBGMCU registers 117 Figure 78 Generator Options debug MCU in STM32CubeIDE ...
