6 |
P a g e
© 2 0 1 9 s t m c a n n a v 1 . 6
POWERING ON THE ROCKETBOX
TURNING ON THE ROCKETBOX
Step 1.
Plug three-prong cord into a standard 110v/20amp wall outlet.
Step 2.
Turn the red lock out switch to the up position (on the right side of
machine) for
ON
. Turn back for
OFF
.
Step 3.
Make sure the touch screen powers on.
Step 4
.
If it does not turn on, be sure the red
E-STOP
button next to the LCD
screen is disengaged and in the pulled-out position. *In case of
emergency, you can push in the
E-STOP
button to quickly shut down
the machine.
GOOD PRACTICES:
ü
Pre-weigh your material with an overfill of 20%-30% prior to cycle.
ü
Consistency should match that of a personal hand grinder to yield desired results. It is
recommended to first test various grinds using the ‘sample’ presets in the touch screen prior to
adjusting settings.
*
For best results, material should
not
be ground too finely (like powder) and be
free of seeds and stems.
(See page 14 for images)
ü
Mix product well before placing into machine.
0.5 -
GRAM TRAY
Industry Standard 1-1/4in. cones. (measures approx. 84mm in length)
1 -
GRAM TRAY
Industry Standard 109mm King Size cones.
Содержание ROCKETBOX
Страница 20: ...19 P a g e 2 0 1 9 s t m c a n n a v 1 6 NOTES...
