Single Static
Bracket
Dual Static
Vertical Bracket
Dual Static
Horizontal Bracket
5
SpeedTech Lights, Inc © 2021
ZX-180 TIR
COMBO SURFACE / UNDER MIRROR MOUNT
Static Mounting Bracket (Sold Separately)
•
Run cable through the Foam Pad and Bracket central holes.
•
Use the hardware included with the Bracket to secure the unit to the Bracket.
Surface Mounting w/ Flange and Foam Backing Pad (Included)
•
Run cable through the Foam Pad central hole.
•
Slide flange over the unit.
•
Use the included hardware to mount the unit to the vehicle.
Mini L-Bracket Mount (Included)
•
The mini L-bracket has two sets of holes in it.
•
Use the smallest diameter hole to affix the L-bracket to the unit using the included hardware.
•
Use the hardware included with the Z unit to mount the assembly to the vehicle via the larger
diameter hole.
Extension Cable (Sold Separately)
•
If you are extending the main cables, just add the desired length of cable to the end of the main
cables coming out of the unit. You will solder and heat shrink the wire you are lengthening from
the unit to each additional length of extension cable. DO NOT cross connect wires.
•
NOTE: DO NOT leave connectors, cables, solder points
exposed to heat, moisture, or debris.
