STK Professional Audio VM 10SD Stereo, Руководство пользователя

Страница: 6 / 22

Panel Descriptions
9a. Pan
The pan control feeds the left and right master
outputs. In full counterclockwise position, it
feeds only the left output. In full clockwise position,
it feeds only the right output. In intermediate
positions, it feeds both output in varying proportions.
When the Stereo MetroMixer is operated in
Min+Monitor mode, the pan control is inactive.
FRONT PANEL MASTER SECTION
10. Left Level / Mono Level
This control provides adjustment of signal to the left
main output connector, and serves as volume
controller one internal amplifier: the left amplifier in
Left+Right mode, or the main amplifier in
Main+Monitor mode.
11. Main Level
12. Reverb To Monitor
13. Right Level
This control provides adjustment of signal to the
right main output connector, and serves as volume
control for the right internal amplifier in
Left+Right mode. In Main+Monitor mode, this control
affects only the right main output.
14. Reverb To Main
15. DSP/Aux 1 Send
The aux 2 send provides final output level control
for auxiliary send 1 found on the connector panel.
16. Monitor / Aux 2 Send
This send provides final output level control for
the monitor / auxiliary send 1 found on the
connector panel. In Main+Monitor mode, it also
serves as the volume control for the monitor
internal amplifier.
17. Tape In/Aux 1 Return
The aux 1 return control provides continuously
variable adjustment of the signal derived from the
aux return 1 in put connector. This signal is then
routed to the left and right main level. hen the
phantom power circuit has been engaged.
18, Aux 2 Return
The aux 2 return control provides continuously
variable adjustment of the signal derived from the
aux return 2 input connector. This signal is then
routed to the left and right main level controls.
20. Main / Monitor Switch
21. L/R Monitor Switch
22. DSP On/Off Switch
23. Phantom Power
In the on(in) position, this switch provides
phantompower to all microphone inputs.
(See section IV Operation for more details.)
24. DSP TO L/R
25. Tape To Monitor/Aux 2
The tape to monition / aux 1 level control
provides continuously variable adjustment of
the signal derived from the tape in jacks
located on the connector panel and sends that
signal to the monitor/aux 1 master control. In
other words, you ca send your tape input signal
to the monitor output. You can also feed this
signal to the built-in monitor amp in
Main+Monitor mode.