9
AFTER SALES SUPPORT
AUS Hotline Costs
1300 886 649
AUS
MODEL: TB-2190 PRODUCT CODE:4248 07/2014
8
AFTER SALES SUPPORT
AUS Hotline Costs
1300 886 649
AUS
MODEL: TB-2190 PRODUCT CODE:4248 07/2014
Instructions
Filling the water reservoir
• Make sure the iron is disconnected
from the power point.
• Open the water inlet cover.
• Using a beaker, fill the reservoir with
water, as illustrated (Fig. 1).
• Fill up to the MAX level marked on the
side of the water tank.
NOTE:
Only fill the tank with water.
Do not use water with any chemical additives or other liquids.
Selecting a temperature setting
• Connect the iron to a suitable mains power outlet: the LCD lights up for a
second, a beep is emitted and then the screen will turn off.
• Press the
TEMP / POWER ON/OFF
button to turn on the iron: one dot will
appear on the LCD (this is the lowest heat setting).
• Press the
TEMP / POWER ON/OFF
button to raise the temperature
setting from one to three dots and to the maximum, as illustrated (Fig. 2).
• Press the
TEMP
button to lower the temperature setting. The iron will
beep every time you press the temperature control buttons to adjust the
temperature setting.
• Whenever the setting is changed from low to high or from high to low, the
symbol will appear on the LCD and the or symbol will blink.
• When the soleplate temperature has reached the selected temperature
setting, the iron will beep, the LCD will display the
symbol and the
or symbol will disappear.
• The iron is ready for use.
Instructions (Cont.)
Dry ironing
• Connect the iron to a suitable mains power outlet:
the LCD lights up for a second, a beep is emitted
and then the screen will turn off.
• Press the
TEMP / POWER ON/OFF
button to
turn on the iron: one dot will appear on the LCD
(this is the lowest heat setting).
• To select the temperature setting according to the
recommendation of the garment label, follow the
instructions under “Selecting a temperature setting”, opposite.
• The iron is now ready for dry ironing (Fig. 3).
• To switch off the iron, press and hold the
TEMP
button for two seconds:
the LCD will go blank with a beep.
• Disconnect the iron from the mains supply outlet.
• After the iron has cooled down completely, store it vertically in a safe place,
out of children's reach.
Steam ironing
• Fill the iron as described in “Filling the water
reservoir”, opposite.
• Connect the iron to a suitable mains power outlet:
the LCD lights up for a second, a beep is emitted
and then the screen will turn off.
• Press the
TEMP / POWER ON/OFF
button to
turn on the iron: one dot will appear on the LCD
(this is the lowest heat setting).
• Set the temperature to setting 4 or higher, as illustrated in Fig. 2, opposite.
• Press the steam button for steaming: the iron will beep and the symbol
will start blinking.
• When the iron is ready for steam ironing, all symbols will stop blinking (Fig. 4).
• To switch off the iron, press and hold the
TEMP
button for two seconds:
the LCD will go blank with a beep.
• Disconnect the iron from mains supply outlet.
• After the iron has cooled down completely, store it vertically in a safe place,
out of children's reach.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
