7
AFTER SALES SUPPORT
AUS Hotline Costs
1300 886 649
AUS
MODEL: TB-2190 PRODUCT CODE:4248 07/2014
6
AFTER SALES SUPPORT
AUS Hotline Costs
1300 886 649
AUS
MODEL: TB-2190 PRODUCT CODE:4248 07/2014
Getting Started
Before first use
• Unpack the appliance but keep all packaging materials until you have
made sure your new iron is undamaged and in good working order. Plastic
wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach.
• Inspect the cord and plug for damage or wear before each use. Do not use
the appliance if the appliance or its cord have been damaged or are not
working properly. In case of damage, contact our after sales support line for
advice on return or repair of the damaged product.
• Remove any protective films or stickers from the soleplate and iron, if there
are any.
• Unwind and straighten the power cord.
• Fill the iron as described in “Filling the water reservoir”, page 8.
• Connect the iron to a suitable power point; the iron will beep and the LCD
will display all logos for one second, then turn off.
• Press the
TEMP
button to turn on the iron; the LCD will display one dot
and the iron will start to heat up.
• Press the
TEMP
button to raise the temperature setting to the maximum
setting (Linen), as described in “Selecting a temperature setting”, page 8.
• The iron is now ready for first use. For first time ironing, we recommend using
on an old towel or similar cloth and ironing it with full steam until no more
steam is produced.
• When the water tank is empty and no more steam is produced, the
preparation work is completed. The iron is now ready for proper use.
Features
Anti-drip system
This steam iron features an automatic anti-drip system, which prevents water
escaping from the soleplate when the iron is too cold to produce steam. You do
not have to activate this feature.
During use, the anti-drip system may emit a loud clicking sound, particularly
during heat-up or while cooling down. This is perfectly normal and indicates that
the system is functioning correctly.
Auto shut-off
This safety feature operates automatically and shuts off the power supply when
the iron is not being used while connected to a mains supply outlet. It operates in
two modes:
Auto shut-off in horizontal and side rest
• The iron will switch off automatically after about 30 seconds if the iron is
immobile in the ironing position (horizontal and side rest).
• The LCD will display the pause symbol
and the backlight will be off.
• Simply move the iron to turn it back on.
Auto-shut off in vertical
• The iron will switch off automatically after about 8 minutes if the iron is left
on its heel rest position (vertically).
• The LCD will display AUTO-OFF and the backlight will be off.
• Simply move the iron to turn it back on.
NOTE:
The iron will take about 60 seconds to reach its previous soleplate
temperature.
Language selection
You can change the language settings on the LCD from English to German or
French. To change the setting, connect the iron to the power supply and switch it
on, then press the
TEMP
button and hold it for two seconds: the LCD displays
EN (this is the default setting, denoting the language is English). Press the
same button again to change the language to German (DE) or French (FR), the
language options run in a loop. When your desired language shows up, leave it
for three seconds to confirm your selection.
Built-in anti-scale system
The built-in anti-scale cartridge is designed to reduce a scale build-up that may
occur during steam ironing. While it will not completely stop the natural process
of scale build-up, it will prolong the working life of your iron.
