14 of 40
Operating Manual:
SU780UE
10207.5
|
7.18.2016
4. Unpacking and Installation
NOTE:
Prior to installing the SU780UE, inspect the unpacked unit and any included
items for shipping damage. Compare all contents to the packing list for completeness.
4.1 – Freezer Site Qualification
1.
Note the shipping packaging dimensions of 86" H x 43" D x 44" W |
(2184 x 1092 x 1016 mm) and shipping weight of 721 lbs. | (321 kg).
2.
When moving the shipment from the point of receipt to the place where
it will be unpacked. The installation site must accommodate the freezer exte-
rior dimensions of 79" H x 34.2" D x 36" W | (2007 x 869 x 914 mm) and weight
of 625lbs. | (283 kg).
3.
There are no specific required clearances for the top and back of the freezer;
however allowances must be made for electrical connections to the panel
on the back of the freezer. The left side requires appropriate space for handle
access. The right side requires appropriate space for door opening.
4.
Ingress to the access port (see Page 10) is required during normal operation.
5.
The freezer should be installed on a level surface. The leveling feet can
accommodate small variations.
6.
There must be sufficient room to fully open the freezer’s door to access
its contents.
7.
The facility/room lighting must not obscure the readability of the touch
screen display and must provide good visibility for working with the contents
of the freezer.
8.
Do not block the air vents from the mechanical compartment.
4" clearance on right side of unit is recommended.
9.
Care must be taken while unpacking and installing the freezer. Be mindful
of its size and weight. Dropping the freezer is likely to damage it.
10. TIPPING HAZARD:
Do not pitch the freezer more than 12 degrees from hori-
zontal. Doing so may cause it to tip over.
CAUTION:
TOP HEAVY.
