background image

10

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: STR-X70GH  PRODUCT CODE: 53105  03/2016

Installation

Unpacking the appliance

•  This product has been packaged to protect it against transportation 

damage. Unpack the appliance but keep all packaging materials until 
you have made sure your new gas cooktop is undamaged and in perfect 
condition. If you have any doubts, do not use the appliance and call our 
after sales support centre for advice.

•  The carton is recyclable. Whenever possible, reuse the carton and recycle 

it when disposing of the packaging materials. 

•  Some parts on the appliance are protected by a plastic film. This protec-

tive film must be removed before the appliance is used. We recommend 
carefully slitting the plastic film along the edges with a sharp knife, but 
take care not to damage the cooktop surface. 

•  Plastic wrapping can be a suffocation hazard for babies and young 

children, so ensure all packaging materials are out of their reach and 
disposed of safely.

WARNING: Professional installation only!

•  This cooktop must be correctly installed by an authorised, licensed 

gasfitter/plumber only, in accordance with Gas Installation Code 
AS NZS 5601, all other applicable rules and regulations and all 
instructions in this manual. It is in your interest and that of your safety 
to ensure compliance. 

•  Do not try to install the cooktop yourself! 

Doing so will expose you 

to danger and void the warranty. Improper installation, adjustment, 
alteration or service can cause injury or damage. We decline any 
responsibility for injury or damage, to persons or property, as a result of 
improper use or installation. 

•  This appliance is not connected to a flue for discharge of the 

combustion products; therefore, it must be connected in compliance 
with the above mentioned installation rules. Particular attention must 
be paid to the instructions given on the opposite page for ventilation.

•  Any adjustments, conversions and maintenance of this product may 

only be carried out by an appropriately authorised person, as mentioned 
above.

•  The safety and automatic adjustment devices of the appliance may 

only be modified by an authorised service agent.

Содержание STR-X70GH

































Отзывы: