21
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-SGC PRODUCT CODE: 56487 06/2017
Using the Ceramic Cooktop
Once the cooktop has been connected to the power supply, the buzzer will
emit a beep sound and all indicators light up briefly and then go out. This
indicates that the ceramic hob has entered the state of standby mode.
Instructions
Fig. 11
Fig. 12
Fig. 13
Fig. 14
To Start Cooking
1. Touch the ON/OFF control to switch on the cooktop (Fig. 11). All
indicators will show [ – ].
2. Place a suitable pan on the cooking zone that you want to use (Fig. 12).
Make sure the bottom of the pan and the surface of the cooking zone are
clean and dry.
3. Touch the appropriate Heating Zone Selection control (Fig. 13).
4. Select a heat setting by touching the [ – ] or [ + ] control (Fig. 14).
Each cooking zone can be set from power level 1 to 9.
IMPORTANT!
• If you do not choose a heat setting within 1 minute, the cooktop will
automatically switch off and you will have to start again at step 1.
• You can modify the heat setting at any time during cooking.
• By holding down either of the [ – ] or [ + ] control, the value will adjust
up or down.
