AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: STR-G34M-B PRODUCT CODE: 59454 12/2017
10
Getting Started
Before first use
• Unpack
: When unpacking the appliance, make sure to remove any packing
materials from the interior. Keep the original packaging carton and materials
in a safe place. It will help prevent any damage if the product needs to be
transported in the future. In the event it is to be disposed of, please recycle
all packaging materials where possible. Plastic wrapping can be a suffocation
hazard for babies and young children, so ensure all packaging materials are
out of their reach and disposed of safely.
• Inspect
: Unwind the power supply cord to its full length and inspect it
for damage. Then check the microwave oven for any damage, such as a
misaligned or bent door, damaged door seals and sealing surfaces, broken or
loose door hinges and latches, dents inside the cavity or on the door.
WARNING
:
If there is any damage to the appliance or its cord, do not operate
the microwave oven! Contact our after sales support line.
• Read
this manual to familiarise yourself with the parts and operating principles.
Pay particular attention to the safety advice on the previous pages.
• Clean
: Wipe the inside surfaces of the microwave oven with a damp cloth.
Wash the glass tray with a soft cloth in warm water and a little dish detergent
to remove any dust from transport. Rinse and dry thoroughly.
Installation
• Position
: Place the microwave oven on a flat, stable surface that can support
the weight of the oven plus the heaviest foods likely to be cooked in it.
WARNING:
Do not place the microwave oven where heat, moisture or high
humidity are generated (such as above a cooktop), or near combustible
materials. Do not place it in a cabinet; it is intended to be used freestanding.
• Clearances
: For correct operation, the microwave oven must have sufficient
airflow. Allow 20cm of space above the oven, 10cm at the back and 5cm
on both sides. Do not cover or block any openings on the appliance. Do not
remove the feet. Do not remove the distance holder at the back or sides, as it
ensures minimum distance from the wall for air circulation.
• Assembly
: Place the support/roller ring in its position in the cavity base and
the shaft in the centre. Then fit the glass tray on top of the shaft, making sure
it sits securely in place and can move freely on the roller ring.
WARNING:
Do not operate the appliance without the glass tray, roller ring and
shaft in their proper positions.
• Power
cord
: Make sure that the power cord does not run under the oven or
over any hot or sharp surface. Also ensure that the socket is readily accessible
so it can be easily unplugged in an emergency.