12
MODEL: SOBF118 | PRODUCT CODE: 59117 | 10/2017
Instructions
• First use:
After delivery, wait for eight hours before connecting the appliance to your mains supply. This
will allow any refrigerant gases that may have been disturbed during the transportation process to settle.
• First cooling down:
When you first switch on the beverage chiller, the compressor will run continuously
until the beverage chiller reaches the set temperature. During this period of time, try not to open the
door frequently or place bottles inside the appliance. After about 3–4 hours, you can start loading the
beverage chiller.
• Odour:
You may notice an odour when you first switch on the beverage chiller. This is due to the parts
being new and is no cause for concern. The odour will subside as the beverage chiller starts to cool.
IMPORTANT
• When you use the beverage chiller for the first time or restart it after it has been turned off for a long time,
there could be a few degrees variance between the temperature you select and the one indicated on the
LED display. This is normal and it is due to the length of activation time. Once the beverage chiller has
been running for a few hours, everything will return back to normal.
• When loading several bottles or cans at once, it will take longer for the appliance to cool the individual
bottles than when adding a bottle at a time.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting the beverage
chiller or reconnecting it to your mains supply.
Turning the Appliance On and Off
• When the beverage chiller is connected to the power outlet it will turn on automatically.
Normal Operation
• During normal operation the controller display will show the desired temperature that the beverage chiller
is currently set to.
• The small indicator light on the left (under the symbol) will illuminate to confirm the beverage chiller is in
its normal cooling mode, and compressor is running.
To Set the Desired Temperature
• Press the “SET” (
) button once. A ‘beep’ will sound, and the display will start to flash.
• Use the “Up” or “Down” ( or ) buttons to set to the desired temperature. Fig. 3
• Press “SET” again to complete the operation. Alternatively, do not press anything for 5–10 seconds
and the new desired temperature setting will be saved.
Automatic Defrost
Note: The beverage chiller is built to automatically defrost and prevent any ice forming on the evaporator.
The ‘Defrost cycle will automatically run for 20 minutes once every 8 hours.
• When in a ‘Defrost’ cycle, the indicator light will illuminate under the symbol.
Manual Defrost
• Press the ‘Defrost’ ( ) button and hold it down—a ‘beep’ will sound as soon as it is pressed.
• Hold button down for 10–20 seconds, until a second ‘beep’ can be heard.
• The indicator light will now illuminate under the symbol and the beverage chiller is now in ‘defrost’ cycle.
• ‘Defrost’ will run for 20 minutes, and then automatically revert to normal operation.
Fig. 3
Pressed × 6
→
