AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: JK-140 PRODUCT CODE: 54993 09/2016
13
Other Useful Information (Cont.)
Cleaning the filter
Clean the anti-scale filter regularly to ensure an easy flow of water.
WARNING!
Before removing or refitting the filter, make sure the power base is unplugged
and the kettle is switched off, empty and completely cool.
• To remove the filter, squeeze together the two small taps at the side of the
filter and then gently push the filter up and out of its position inside the spout.
• Under running water, rub the filter gently with
your fingers. Use a soft brush, if necessary, but
be careful not to use anything that could tear or
damage the filter when cleaning. Alternatively,
wash the filter safely in the cutlery rack/basket
of your dishwasher.
• In hard water areas, descale the filter regularly
to avoid damaging the pouring performance of
your kettle. Soak the filter in a descaling solution
(see opposite), rub off any residues gently with
your fingers and then rinse the filter thoroughly.
• Make sure to fit the filter back into the kettle before reuse.
Storage
When in storage or not in use, the power cord may be wound around the cord
storage underneath the power base.
Before storing the appliance, make sure it is
dry and unplugged. Store it in the original carton, which will protect it from dust, in
a clean and dry place, out of children's reach.
Service, repair and spare parts
Do not attempt to repair, disassemble or modify the kettle or power base. The
unit contains no user-serviceable parts inside. If you have any problems with the
kettle, contact our after sales support centre for advice on repair or replacement.
Our after sales support centre stocks spare power bases, lids and filters for the
JK-140 1.7L Kettle. To purchase a part, call the centre on 1300 886 649 or email
us at [email protected]
