background image

AFTER SALES SUPPORT

1300 886 649

[email protected]

AUS

MODEL: JK-140   PRODUCT CODE: 54993   09/2016

10

Using the kettle

•  Filling: 

To fill the kettle, remove it from the power base, open the lid and 

fill the kettle with the desired amount of cold tap water, then close the lid 
securely. 
Make sure to fill the kettle at least to the minimum (0.8L) but not beyond the 
maximum (1.7L) level. Too little water will result in the kettle turning off before 
the water has boiled (because of the boil-dry protection). Too much water will 
result in boiling water spilling out of the spout when boiling. Take care that no 
water spills onto the power base. 
Also ensure that the anti-scale filter sits securely in place behind the spout. 
Do not use the kettle without the filter securely in place.

•  Positioning: 

Before positioning the kettle on the power base, ensure that the 

lid is securely closed and that the On/Off switch is in the Off position (up). 
Carefully position the kettle on the power base so that any steam is directed 
away from you, taking care not to spill any water onto the base.

•  Switching on: With dry hands, plug the power base into an appropriate wall 

outlet and turn on power at the outlet. 
Press the On/Off switch down. The indicator light in the power switch will light 
up and the water will start heating up. 

Do not open the lid during use. The 

kettle will automatically turn itself off when the water has boiled.

•  Pouring: Wait until the water has completely stopped bubbling before 

pouring. Grip the handle and lift the kettle off the power base. 

CAUTION:

 Take care when pouring the water to avoid scalding from boiling 

water or hot steam. Do not open the lid while the water in the kettle is hot.

•  Stop heating: To stop the heating process any time during operation, push 

the On/Off switch upwards to the Off position.

•  Re-boiling water: To re-boil the water, allow the kettle to cool for 15–20 

seconds before pressing the On/Off switch down again.

•  After use: The kettle may be stored on the power base but make sure the 

power supply is turned off when the kettle is not in use.

Instructions

CAUTION!

Take care when pouring the water to avoid scalding from boiling water or  

hot steam. Do not open the lid while the water in the kettle is hot.

Содержание JK-140

















Отзывы: