19
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: GYJ45-68 PRODUCT CODE: 52533 05/2016
Other Useful Information
Maintenance
To prolong the service life of your clothes dryer, keep it in good condition and clean
the filters regularly.
Cleaning the lint filter
The lint filter must be in place whenever drying. It must be cleaned before each use.
1. To remove the filter, insert your fingers into the four holes around the exhaust vent
shroud and pull out the filter assembly. It consists of three parts: the exhaust vent
shroud, the lint filter and the exhaust filter (Fig. 14).
CAUTION:
Before cleaning or maintenance, unplug the dryer from the wall socket.
The filter is affixed to
the back of the drum.
2. Separate the three parts (exhaust vent shroud, lint filter and exhaust filter) and,
using a soft brush or vacuum cleaner, clean any lint off the lint filter and exhaust
filter (Fig. 15). Take care not to damage the filters.
3. After cleaning, assemble the parts in the sequence of exhaust filter - lint filter
- exhaust vent shroud (Fig. 16), aligning the recesses in the centre with the
projection in the centre of the drum. Make sure that the filter assembly is firmly
inserted.
NOTE: The metal grid fixed on the rear of the drum should also be cleaned with a
soft cloth or brush.
Fig. 14
Fig. 16
Exhaust
Lint
Exhaust
vent shroud
filter
filter
Fig. 15
Lint filter
Lint
Exhaust filter
Dust cleaner
