16
po.org
MODEL: GS14R-LS PRODUCT CODE: 705588 07/2021
AFTER SALES SUPPORT
info@tem
AUS
1300 112 534
5. To
steam-iron
, make sure you keep pressing the steam trigger button or pull it
towards you to lock for continuous steam emission.
To
dry-iron
, release the steam self-lock button and the steam emission will
stop.
To
add a burst of steam when dry-ironing
, press the steam trigger briefly
when the temperature light is off, then release the button. Repeat this action
as required to remove stubborn creases.
6. When you have finished ironing the garment, release the steam self-lock (if
applicable) and place the iron back on the heat-insulated pad.
Instructions (Cont.)
Horizontal (flat) ironing
Make sure steam head is in the correct position for horizontal ironing (Fig. 13).
1. Place the garment to be ironed on an ironing board.
2. Prepare the appliance as described previously. Ensure that the steam control
is set to the appropriate setting for the garment to be ironed.
3. When the temperature light goes out, the steam is ready. Direct the steam head
away from you and press down the steam trigger button for a few seconds.
Then you may start ironing.
4. Keep the steam trigger button pressed or pull it towards you to lock for
continuous steam emission.
Guide the iron smoothly over the garment to
remove creases and wrinkles (Fig. 14).
Fig. 14
Fig. 13
Steam head
position for
horizontal
ironing