7
General Safety Instructions (Cont.)
Installation
• Proper installation:
Install the appliance according to the instructions in
this manual and national wiring regulations.
Improper installation may result
in the risk of fire, electric shock and/or injury.
• WARNING: Electric shock hazard!
Before installation or servicing, ensure
the unit is switched off and disconnected from the power outlet to prevent
possible injury.
• The location:
When deciding on an installation place, keep in mind that
the area must be flat, the air outlets must not be covered up, and there
must be a properly earthed 220~240V~ 50Hz power outlet nearby.
• Do NOT install/use the appliance in the following areas:
–
outdoors or where water is likely to splash
–
near a bath, shower or swimming pool
–
in an area where oil is likely to splash
–
near a hot gas or electric burner, or sources of fire
–
near sources of heat, or exposed to direct sunlight
–
in an area where furniture or other objects can obstruct the airflow
–
in the presence of flammable substances or vapour such as alcohol,
insecticides, petrol, etc.
–
at a dry cleaner’s premises.
• Cold air exposure:
Never remain directly exposed to the flow of cold air
for a long time, as direct and prolonged exposure to cold air from the air
conditioner could be dangerous for your health. Take particular care in
rooms where there are children, old, or sick people.
•
Moving the appliance:
When moving the air conditioner, always turn it off
first and disconnect the power supply, and move it slowly. Keep the unit
upward during transport and storage.
Cleaning and maintenance
• Disconnect:
Make sure the appliance is disconnected from the power
supply when it will not be used for a long time and before carrying out any
cleaning or maintenance.
• Air filter:
Keep the air filter clean. Do not use the unit without the air filter
fitted. Using it without air filter could cause an excessive accumulation of
dust or waste on the inner parts of the device with possible subsequent
failures.
• Service and repair:
The air conditioner has no user-serviceable parts
contained inside. Do not attempt to disassemble, modify or conduct
repairs on this unit. It has been built in accordance with relevant safety and
performance standards. An electrical specialist must carry out all repairs.
Contact our after sales support centre for advice on service.
AFTER SALES SUPPORT
1300 886 649
AUS
MODEL: A013A-14CB PRODUCT CODE: 12221
10/2019
