6
Engine
•
Run unleaded gasoline with an octane rating of 86 or higher
and 10% or less ethanol.
•
Check engine oil level on level ground daily
•
Drain Honda engine’s oil by removing oil plug in figure 5.
•
Change the oil within the first month or 10 hours, do not
overfill unit.
•
Regular oil changes are required every 6 months or 50 hours
or sooner depending on conditions.
•
10w30 is recommended
•
Clean/replace the air filter every 3 months or 25 hours.
•
See supplemental Engine manufacturer booklet for addi-
tional maintenance procedures and requirements
Grease Points
•
Grease the 2 bearings on the cutting shaft every 50
hours as shown in Figure 4.
•
Grease single bearing on the engine shaft every 50
hours as shown in Figure 5.
Operation
Starting and Stopping the Engine
1.
Turn engine switch to “On” position
Содержание SuperSeeder 2400
