10
Unit Operation
1.
Press down the yellow safety on the handle bars
2.
Squeeze the trigger as shown in Figure 8 with your left or
right hand to move the unit forward. The more pressure
applied, the greater the speed. Note: Quickly releasing the
controls at speed will abruptly stop the unit. Move the con-
trols slowly for the best results.
3.
Push the thumb pad down for reverse.
4.
This unit is equipped with a hydrostatic transmission bypass
valve as shown in Figure 9. Engaging the bypass puts the
transmission in neutral, allowing the unit to roll easily.
Usage
1.
Set desired cutting depth
2.
Push down on the handlebars to raise the front of the
unit off the ground and flip the cutter engagement lev-
er forward as shown in figure 10.
3.
Lower the unit into the ground
4.
Flip seed flow lever as shown in figure 10.
5.
Lift the blades out of the ground when making turns.
Pro Tip:
Make two passes perpendicular to each other over the entire
area to ensure proper coverage.
Содержание SuperSeeder 2400
