Stinger GOLD STINGER X5, Руководство пользователя

Страница: 31 / 37

Important Notes
In order to calculate the depth of the buried target you detected using the
Gold Stinger X5 device…
First, determine the exact center point of the buried target you detected
(by using Pin Pointer mode as an example). Then take the device aside and
reset the ground balance again.
Determine the place where the signal detected for the first time, that is,
the place where the device made a sound or a signal using one of detection
modes.
Do this from all four sides of the place of search area; until you make a
rectangle or square area, then you can enter the Depth Detection mode to
determine the approximate depth of your buried target better.
When using the Gold Stinger X5, check the spot you have detected sever-
al times.
You may encounter misleading signals when searching for the first time,
especially if the target site contains rusty objects of tin, steel, chrome and
galvanized metals that remain underground.
To reduce these errors, try to clean the soil (about 30 cm) from the place
you detect in the form of a grave and repeat the search process in this
area again.
Important Notes
About target depth
29