Stinger Card, Руководство пользователя

Страница: 19 / 20

19 Notes Important Safety Instruction
Special Caution
The Stinger Freedom Laser Transmitter, may transmit a laser beam that
can be harmful to sight. Never, under any circumstances look at the
sensor while it is operating and / or it is connected to a power supply.
This is especially true for looking into the Laser Transmitter from up close,
or through any kind of optical lenses!
Laser safety
The Stinger Freedom Laser has been tested and classifi ed as a class 1
laser product in accordance to European and international eye safety
regulations EN 60825-1 (2014) and IEC 60825-1 (2014) under normal
operating conditions and those of single fault failure.
Defi nition: Class 1 laser products are safe under any reasonably
foreseeable conditions of operation, but may be hazardous if a person
employs optics within the beam. An outer transmitter of the Freedom
Laser is labeled in accordance to regulations.
IMPORTANT SAFETY INSTRUCTIONS, READ BEFORE
OPERATION
Do not plug any third party equipment into any of the sockets
in the Laser Center, and do not connect any part of the
Freedom Laser to third party equipment. Doing so may cause
fi re or damage to the unit, and voids warranty.
Use of controls or adjustments or performance or procedures other than
those specifi ed herein may result in hazardous radiation exposure.
Maintenance
The Freedom Laser unit is basically maintenance free, however, you
should check periodically that lenses on outer sensors are clean. You can
gently clean them with any water based means or using a simple wipe
.