
English
Page | 22
M
AINTENANCE
B
ATTERY
C
HARGING
Notes:
§
The battery is built into the WAA Programmer and does not need to be
removed. Contact your clinician if you experience poor battery life.
§
You will need the Charger Kit to recharge the internal battery.
Steps:
1.
Remove the WAA Programmer from your midsection.
2.
Remove the WAA Programmer from the pouch.
3.
Connect the USB cable to the power adapter.
4.
Plug the power adapter into a wall outlet.
5.
Connect the opposite end of USB cable to the micro-USB port on the
side of the WAA Programmer.
6.
Charging Indicator Light will blink on while the battery is charging.
7.
Allow the battery to charge for at least four hours.
8.
Charging Indicator Light will stay solid when the battery is fully
charged.
9.
WAA Programmer is now ready to be used again.